跳转到主内容

简介

The frame cover protects the battery and the inside components of the device.

配件

没有特定配件。

  1. Pry the back cover from the bottom of the phone, pulling outwards and upwards.
    • Pry the back cover from the bottom of the phone, pulling outwards and upwards.

  2. Fully remove the cover and set aside in a safe place.
    • Fully remove the cover and set aside in a safe place.

  3. Remove all the nine 2mm screws using the JIS #00 Screwdriver.
    • Remove all the nine 2mm screws using the JIS #00 Screwdriver.

  4. Pry the frame off using the spudger pulling upwards going to different areas around the device.
    • Pry the frame off using the spudger pulling upwards going to different areas around the device.

    • The back cover is secured by glue. Removal could be more difficult than expected.

结论

To reassemble your device, follow these instructions in reverse order. Ensure that all sides of the frame cover are firmly snapped on before replacing the screws.

另外一个人完成了本指南。

Tione Gooden

于2018年09月21日注册

269 信誉积分

创作了2篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 125