跳转到主内容

修复你的物品

维修的权力

商店

简介

This guide will help you replace the rear-facing camera on the back panel of the BLU Grand M2. It is a five-step process and can be completed in as little as six minutes.

The process is of a moderate difficulty and requires five tools for completion.

  1. Check the front panel and confirm you are repairing the BLU Grand M2 (figure 1) Turn the device over and identify the the rear-facing camera (figure 2) This is what you will be replacing
    • Check the front panel and confirm you are repairing the BLU Grand M2 (figure 1)

    • Turn the device over and identify the the rear-facing camera (figure 2) This is what you will be replacing

  2. Locate the two torx  screws at the bottom of the phone and remove them using the T2 Torx Screwdriver.
    • Locate the two torx screws at the bottom of the phone and remove them using the T2 Torx Screwdriver.

  3. Use the suction and  pry tools to carefully remove the black plate.
    • Use the suction and pry tools to carefully remove the black plate.

    • Be cautious!! Do not damage the phone display or inside components while using pry and suction tools.

  4. Identify the back-panel camera in the left -hand corner of the open device. (Figure 1)
    • Identify the back-panel camera in the left -hand corner of the open device. (Figure 1)

  5. Use the Plastic Pry Tool to carefully to lift the tab on the right-hand side of the  connector. Carefully remove camera from housing using a pair of tweezers. Carefully remove camera from housing using a pair of tweezers.
    • Use the Plastic Pry Tool to carefully to lift the tab on the right-hand side of the connector.

    • Carefully remove camera from housing using a pair of tweezers.

结论

To reassemble your device, follow these instructions in reverse order.

Alan Rodriguez

于2018年09月10日注册

293 信誉积分

创作了2篇指南

团队

Gateway, Team S1-G3, Luster Fall 2018 Gateway, Team S1-G3, Luster Fall 2018 的会员

GCC-LUSTER-F18S1G3

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 187