跳转到主内容

简介

Use this guide to replace the motherboard in your BLU Energy X.

  1. Remove the back case using plastic opening tool. Remove the back case using plastic opening tool. Remove the back case using plastic opening tool.
    • Remove the back case using plastic opening tool.

  2. Remove the seven 4mm Phillips #000 screws. Remove the top plate.
    • Remove the seven 4mm Phillips #000 screws.

    • Remove the top plate.

  3. Detach the battery from the mother board using a plastic opening tool. Use a plastic spudger to remove battery. Use a plastic spudger to remove battery.
    • Detach the battery from the mother board using a plastic opening tool.

    • Use a plastic spudger to remove battery.

  4. iPhone 电池维修工具包

    只要 $29.99

    Buy Now

    iPhone 电池维修工具包

    只要 $29.99

    Buy Now
  5. Use the flat end of a spudger to flip up the black retaining flap on the ZIF connector. Use the flat end of a spudger to flip up the black retaining flap on the ZIF connector.
    • Use the flat end of a spudger to flip up the black retaining flap on the ZIF connector.

  6. Gently pull the ribbon cable free of the ZIF connector. Gently pull the ribbon cable free of the ZIF connector.
    • Gently pull the ribbon cable free of the ZIF connector.

  7. Gently peel up the antenna. This is secured with some light adhesive, so some force may be required.
    • Gently peel up the antenna.

    • This is secured with some light adhesive, so some force may be required.

  8. Gently rotate the motherboard up so that the front-facing camera is pointed towards you. Use the pointed end of a spudger to disconnect the antenna cable and the ribbon cable. Use the pointed end of a spudger to disconnect the antenna cable and the ribbon cable.
    • Gently rotate the motherboard up so that the front-facing camera is pointed towards you.

    • Use the pointed end of a spudger to disconnect the antenna cable and the ribbon cable.

  9. Lift the motherboard up and out of the device. Lift the motherboard up and out of the device.
    • Lift the motherboard up and out of the device.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Geoff Wacker

于2013年09月30日注册

76,700 信誉积分

创作了88篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 314