BLACK and DECKER BDERO100 Hook and Loop System Replacement - iFixit 维修指南

简介

This guide provides information on how to remove and replace the hook and loop system of the BLACK and DECKER BDERO100 5 inch sander. The only tool that you will need for this process is the JIS - J1 bit or equivalent.

你所需要的

步骤 1 Hook and Loop System

BLACK and DECKER BDERO100 Hook and Loop System Replacement, Hook and Loop System: 步骤 1 中的图像 1，1

Remove the sanding paper from the velcro.

步骤 2

BLACK and DECKER BDERO100 Hook and Loop System Replacement: 步骤 2 中的图像 1，1

Select the JIS - J1 bit or the most appropriate bit to match the screws for your model.

步骤 3

BLACK and DECKER BDERO100 Hook and Loop System Replacement: 步骤 3 中的图像 1，2

BLACK and DECKER BDERO100 Hook and Loop System Replacement: 步骤 3 中的图像 2，2

Use the Bit Driver to take off the four 12.5 mm Phillips screws at the base of the hook-and-loop system.
Be careful not to lose the lock washers (black rings).

步骤 4

BLACK and DECKER BDERO100 Hook and Loop System Replacement: 步骤 4 中的图像 1，2

BLACK and DECKER BDERO100 Hook and Loop System Replacement: 步骤 4 中的图像 2，2

Once all screws and washers have been removed, hold the hook and loop system and separate it from the device.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Christian Moss

于02/10/16注册

101 声望

撰写一个指南

团队

USF Tampa, Team 1-5, Sullivan Spring 2016 USF Tampa, Team 1-5, Sullivan Spring 2016 的会员

USFT-SULLIVAN-S16S1G5

4 名成员

创作了6篇指南

0条评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 4

过去 30 天： 12

总计 1,540