跳转到主内容

Axess TA2513-10WT Speaker Replacement

你所需要的

  1. Axess TA2513-10WT Speaker Replacement, Back Cover: 步骤 1 中的图像 1,1
    • Lay the tablet down on a flat surface with the screen facing up, and the external camera facing upwards and closest to you.

  2. Axess TA2513-10WT Speaker Replacement: 步骤 2 中的图像 1,3 Axess TA2513-10WT Speaker Replacement: 步骤 2 中的图像 2,3 Axess TA2513-10WT Speaker Replacement: 步骤 2 中的图像 3,3
    • Insert the plastic opening tool in the space between the screen and the back cover above the volume buttons.

    • Slide the plastic opening tool gently along the sides.

    • If a small gap is not created between the screen and the back cover, pry gently upward at each of these latching points.

  3. Axess TA2513-10WT Speaker Replacement: 步骤 3 中的图像 1,1
    • Place the spudger in an open space to keep the back case from shutting while you continue to slide the opening tool.

  4. Axess TA2513-10WT Speaker Replacement: 步骤 4 中的图像 1,1
    • Remove the back cover with your hands once all points have been unlatched. It should separate completely from the screen that contains the battery and chip components.

  5. Axess TA2513-10WT Speaker Replacement, Speaker: 步骤 5 中的图像 1,1
    • Remove tape attached to black and red speaker wires.

  6. Axess TA2513-10WT Speaker Replacement: 步骤 6 中的图像 1,1
    • Identify the four speaker nodes.

    • From left to right the nodes are "SPKP1", "SPKN1", "LN", and "LP"

  7. Axess TA2513-10WT Speaker Replacement: 步骤 7 中的图像 1,1
    • Place the soldering tool on the speaker node labeled "SPKP1" and quickly remove the red wire with tweezers.

  8. Axess TA2513-10WT Speaker Replacement: 步骤 8 中的图像 1,1
    • Place the soldering tool on the speaker node labeled "SPKN1" and quickly remove the black wire with tweezers.

  9. Axess TA2513-10WT Speaker Replacement: 步骤 9 中的图像 1,1
    • Place the soldering tool on the speaker node labeled "LP" and quickly remove the black wire with the tweezers.

  10. Axess TA2513-10WT Speaker Replacement: 步骤 10 中的图像 1,1
    • Place the soldering tool on the speaker node labeled "LN" and quickly remove the red wire with tweezers.

结论

To reassemble your device, follow these instructions in reverse order.

Steven Kavanagh

于03/24/15注册

301 声望

创作了3篇指南

团队

Baylor, Team 6-3, Shaver Spring 2015 Baylor, Team 6-3, Shaver Spring 2015 的会员

BU-SHAVER-S15S6G3

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 299