修复你的物品 社区 商店

Axess TA2513-10WT Battery Replacement

你所需要的

  1. Axess TA2513-10WT Battery Replacement, Back Cover: 步骤 1 中的图像 1，1

    • Lay the tablet down on a flat surface with the screen facing up, and the external camera facing upwards and closest to you.

    编辑

  2. Axess TA2513-10WT Battery Replacement: 步骤 2 中的图像 1，3 Axess TA2513-10WT Battery Replacement: 步骤 2 中的图像 2，3 Axess TA2513-10WT Battery Replacement: 步骤 2 中的图像 3，3

    • Insert the plastic opening tool in the space between the screen and the back cover above the volume buttons.

    • Slide the plastic opening tool gently along the sides.

    • If a small gap is not created between the screen and the back cover, pry gently upward at each of these latching points.

    编辑

  3. Axess TA2513-10WT Battery Replacement: 步骤 3 中的图像 1，1

    • Place the spudger in an open space to keep the back case from shutting while you continue to slide the opening tool.

    编辑

  4. Axess TA2513-10WT Battery Replacement: 步骤 4 中的图像 1，1

    • Remove the back cover with your hands once all points have been unlatched. It should separate completely from the screen that contains the battery and chip components.

    编辑

  6. Axess TA2513-10WT Battery Replacement, Battery: 步骤 5 中的图像 1，1

    • Shove the Spudger below the battery pack to remove any tape or adhesive residue.

    编辑

  7. Axess TA2513-10WT Battery Replacement: 步骤 6 中的图像 1，1

    • Lift the battery up with your hands to ensure complete detachment from the screen.

    编辑

  8. Axess TA2513-10WT Battery Replacement: 步骤 7 中的图像 1，1

    • Identify the red wire attached to the node labeled "B+" and the black wire attached to the node labeled "B-"

    编辑

  9. Axess TA2513-10WT Battery Replacement: 步骤 8 中的图像 1，1

    • Press the heated soldering iron down on the "B+" node while simultaneously tugging on the red wire.

    编辑

  10. Axess TA2513-10WT Battery Replacement: 步骤 9 中的图像 1，1

    • Remove the red wire from the node labeled "B+"

    编辑

  11. Axess TA2513-10WT Battery Replacement: 步骤 10 中的图像 1，1

    • Using the same process as the red wire, detach the black wire from the node labeled "B-".

    编辑

  12. Axess TA2513-10WT Battery Replacement: 步骤 11 中的图像 1，1

    • The battery should now be separated from both the screen and circuit board

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Steven Kavanagh

于03/24/15注册

301 声望

创作了3篇指南

徽章: 3

团队

Baylor, Team 6-3, Shaver Spring 2015 Baylor, Team 6-3, Shaver Spring 2015 的会员

BU-SHAVER-S15S6G3

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 290