修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Audiovox CDM-8900 Logic Board Replacement

简介

This is how to remove the 5 screws and pry the logic board free.

你所需要的

  1. Audiovox CDM-8900 Logic Board Replacement, Battery: 步骤 1 中的图像 1，2 Audiovox CDM-8900 Logic Board Replacement, Battery: 步骤 1 中的图像 2，2

    • Hold the phone in one hand, slide the latch up, and pull the battery up to remove it.

    翻译

  2. Audiovox CDM-8900 Logic Board Replacement, Antenna: 步骤 2 中的图像 1，3 Audiovox CDM-8900 Logic Board Replacement, Antenna: 步骤 2 中的图像 2，3 Audiovox CDM-8900 Logic Board Replacement, Antenna: 步骤 2 中的图像 3，3

    • Grasp the antenna at its base and twist to unscrew.

    • Remove the antenna along with its plastic casing from inside the battery housing. Keep the antenna in the plastic casing for reassembly.

    翻译

  4. Audiovox CDM-8900 Logic Board Replacement, Logic Board: 步骤 3 中的图像 1，3 Audiovox CDM-8900 Logic Board Replacement, Logic Board: 步骤 3 中的图像 2，3 Audiovox CDM-8900 Logic Board Replacement, Logic Board: 步骤 3 中的图像 3，3

    • Remove the small rubber insert from the top of the phone to access the top screw.

    • Warning: Screws are very small and may be difficult to see while unscrewing.

    • Unscrew all five (5) screws on the back of cell phone.

    • If screws do not remove after fully unthreading, gently invert and tap phone in hand until the screws come loose.

    翻译

  5. Audiovox CDM-8900 Logic Board Replacement: 步骤 4 中的图像 1，3 Audiovox CDM-8900 Logic Board Replacement: 步骤 4 中的图像 2，3 Audiovox CDM-8900 Logic Board Replacement: 步骤 4 中的图像 3，3

    • Wedge back plate away from cell phone using the leverage from the plastic spudger.

    • The volume control button on the left side of the phone will be loose. Make sure to carefully reinsert during reassembly.

    • Detach logic board from LCD screen connector by gently detaching the small copper plate on the top right of the logic board (shown circled in blue and detached).

    翻译

  6. Audiovox CDM-8900 Logic Board Replacement: 步骤 5 中的图像 1，3 Audiovox CDM-8900 Logic Board Replacement: 步骤 5 中的图像 2，3 Audiovox CDM-8900 Logic Board Replacement: 步骤 5 中的图像 3，3

    • Pop the logic board out from the front of the cell phone.

    • Before reassembly, be sure keypad is lined up with logic board.

    • Before reassembly, be sure camera lens is properly aligned at the top of the logic board and volume controls are in place.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与14其他贡献者

Aaron Shaw

于04/15/10注册

159 声望

创作了6篇指南

徽章: 11

+ 8更多徽章

团队

Cal Poly, Team 28-31, Regan Spring 2010 Cal Poly, Team 28-31, Regan Spring 2010 的会员

CPSU-REGAN-S10S28G31

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 3

总计 2,800