跳转到主内容

修复你的物品

维修的权力

商店

简介

If your audio is distorted, replace the speaker component to get fresh, clear sound.

  1. Using a T4 Torx screwdriver, remove the ten screws at the marked locations.
    • Using a T4 Torx screwdriver, remove the ten screws at the marked locations.

    • Place the screws into a container as to not lose them.

  2. Carefully slide your iFixit Opening Tool between the back panel.
    • Carefully slide your iFixit Opening Tool between the back panel.

    • Lift the back plate of your ASUS ZenBook UX31E, and place it to the side.

  3. Use the plastic opening tool to pry open the back cover of the laptop.
    • Use the plastic opening tool to pry open the back cover of the laptop.

    • Remove the bottom panel of the laptop.

  4. Remove the screw connecting the speaker component to the motherboard using the screwdriver. Remove the screw connecting the speaker component to the motherboard using the screwdriver.
    • Remove the screw connecting the speaker component to the motherboard using the screwdriver.

  5. Disconnect the sound cable from the motherboard. Disconnect the sound cable from the motherboard.
    • Disconnect the sound cable from the motherboard.

  6. Using the plastic opening tool, pry open the speaker component from the computer. Using the plastic opening tool, pry open the speaker component from the computer.
    • Using the plastic opening tool, pry open the speaker component from the computer.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Zachary Somerscales

于2017年02月02日注册

125 信誉积分

撰写一个指南

团队

UW Tacoma, Team 1-2, Rose Winter 2017 UW Tacoma, Team 1-2, Rose Winter 2017 的会员

UWT-ROSE-W17S1G2

4 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 32

总计 1,817