跳转到主内容

修复你的物品

维修的权力

商店

  1. Using a T4 Torx screwdriver, remove the ten screws at the marked locations.
    • Using a T4 Torx screwdriver, remove the ten screws at the marked locations.

    • Place the screws into a container as to not lose them.

  2. Carefully slide your iFixit Opening Tool between the back panel.
    • Carefully slide your iFixit Opening Tool between the back panel.

    • Lift the back plate of your ASUS ZenBook UX31E, and place it to the side.

  3. Disconnect the ribbon between the IO and the motherboard on both sides. Disconnect the ribbon between the IO and the motherboard on both sides.
    • Disconnect the ribbon between the IO and the motherboard on both sides.

  4. Disconnect the fan connector from the motherboard.
    • Disconnect the fan connector from the motherboard.

    • Pull up the clips on the ribbon connectors.

  5. Unscrew the two screws that are across each other. Unscrew the two screws that are across each other.
    • Unscrew the two screws that are across each other.

  6. Using a plastic opening tool, lift the fan off of the laptop. You can now use your hands and carefully pull the fan off the laptop.
    • Using a plastic opening tool, lift the fan off of the laptop.

    • You can now use your hands and carefully pull the fan off the laptop.

结论

To reassemble your device, follow these instructions in reverse order.

Sinh

于2017年02月01日注册

101 信誉积分

撰写一个指南

团队

UW Tacoma, Team 1-2, Rose Winter 2017 UW Tacoma, Team 1-2, Rose Winter 2017 的会员

UWT-ROSE-W17S1G2

4 名成员

创作了9篇指南

This guide does not explain how to replace the fan, but how to remove the fan.

How do you insert a new fan? (Specifically, how do you remove the fan from the component of which it is a part?)

Thank you in advance.

Albert - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 29

总计 1,410