跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

  1. Using a T4 Torx screwdriver, remove the ten screws at the marked locations.
    • Using a T4 Torx screwdriver, remove the ten screws at the marked locations.

    • Place the screws into a container as to not lose them.

  2. Using your iFixit Opening Tool, carefully slide it between the back panel.
    • Using your iFixit Opening Tool, carefully slide it between the back panel.

    • Lift the back plate of your ASUS ZenBook UX31E and place it to the side.

  3. Disconnect the battery from the motherboard by gently pulling up and down on the connector. Disconnect the battery from the motherboard by gently pulling up and down on the connector.
    • Disconnect the battery from the motherboard by gently pulling up and down on the connector.

  4. Using the Phillips #00 screwdriver, remove the screws from the middle and the two corners of the battery. Place the screws into a container as to not lose them.
    • Using the Phillips #00 screwdriver, remove the screws from the middle and the two corners of the battery.

    • Place the screws into a container as to not lose them.

  5. Remove the battery. Remove the battery.
    • Remove the battery.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Hersi Dahir

于2017年02月02日注册

185 信誉积分

撰写一个指南

团队

UW Tacoma, Team 1-2, Rose Winter 2017 UW Tacoma, Team 1-2, Rose Winter 2017 的会员

UWT-ROSE-W17S1G2

4 名成员

创作了9篇指南

Thanks for the easy to understand guide. Cheers!

Rahul Kashelani - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 24

过去的30天: 106

总计 3,805