跳转到主内容

简介

Replacing a computer’s RAM is a necessary process for both upgrading the amount of available memory a computer has and for replacing any malfunctioning sticks of RAM. This guide will step you through the replacement process for replacing the DDR3L stick of RAM found within the ASUS Zenbook UX303L.

  1. Prior to installing RAM, it's good practice to ground yourself to avoid static discharge from damaging the internal components of the computer.
    • Prior to installing RAM, it's good practice to ground yourself to avoid static discharge from damaging the internal components of the computer.

    • Avoid wearing static prone clothing or standing on carpet during the RAM replacement.

  2. Unscrew the eight 3 mm long screws on the bottom of the laptop along the parameter using a T5 Torx screwdriver. Unscrew the one 8 mm long screw at the bottom of the laptop panel using a T5 Torx screwdriver.
    • Unscrew the eight 3 mm long screws on the bottom of the laptop along the parameter using a T5 Torx screwdriver.

    • Unscrew the one 8 mm long screw at the bottom of the laptop panel using a T5 Torx screwdriver.

    • Once all screws have been removed, carefully lift the bottom panel to reveal the RAM.

  3. Carefully pull apart the two clasps circled in red so that the RAM stick pops up. Remove the stick of RAM from the SO-DIMM slot by gripping the edges of the RAM. Remove the stick of RAM from the SO-DIMM slot by gripping the edges of the RAM.
    • Carefully pull apart the two clasps circled in red so that the RAM stick pops up.

    • Remove the stick of RAM from the SO-DIMM slot by gripping the edges of the RAM.

结论

To reassemble your device, follow these instructions in reverse order.

Evan Parker

于2019年04月01日注册

97 信誉积分

撰写一个指南

团队

IUPUI, Team S1-G6, Harley Spring 2019 IUPUI, Team S1-G6, Harley Spring 2019 的会员

IUPUI-HARLEY-S19S1G6

3 名成员

创作了7篇指南

一条评论

This is incomplete. There are two screws more hidden behind the rubber support points (on the hinges side) of the computer.

And you need some adhesive to fix this rubber squares in place after you fix the lid in place.

Ochirosi Paul - 回复

添加评论

浏览统计数据:

过去的24小时: 5

过去的7天: 16

过去的30天: 58

总计 2,111