跳转到主内容

简介

Prerequisite Only

配件

没有特定配件。

  1. Asus ZenFone 2 Disassembly, Removing the Back Cover: 步骤 1 中的图像 1,2 Asus ZenFone 2 Disassembly, Removing the Back Cover: 步骤 1 中的图像 2,2
    • Use your fingernail to gently pry off the phone's back cover at the indicated location. While your fingernail is under the back cover slide your finger around the edges of the phone until the cover pops off.

  2. Asus ZenFone 2 Disassembly, Remove the Inner Cover Screws: 步骤 2 中的图像 1,1
    • Remove the thirteen black screws and the single silver screw from the back of the phone with a JIS size 00 screwdriver.

    • The black screws are 2.8 mm in length.

    • The silver screw is 5.5 mm in length.

    • The black screw next to the camera and the flash is covered by a sticker. This screw can be easily removed as if there were no sticker on top of it. The point of the screwdriver should be able to pierce through the sticker easily.

  3. Asus ZenFone 2 Disassembly, Remove the Inner Cover: 步骤 3 中的图像 1,2 Asus ZenFone 2 Disassembly, Remove the Inner Cover: 步骤 3 中的图像 2,2
    • Use a plastic opening tool to remove the inner phone backing.

    • The parts of the inner backing held down by two strips of double sided tape can be easily loosened by inserting the plastic opening tool underneath it and gently lifting it up.

  4. Asus ZenFone 2 Disassembly, Remove the Speaker: 步骤 4 中的图像 1,1
    • Note the position of the speaker unit so you can replace it in the correct place during reassembly.

    • Take the speaker out of the back of the phone. It should come out easily as soon as the inner back is removed because nothing is holding it down in place anymore.

结论

To reassemble your device, follow these instructions in reverse order.

40等其他人完成本指南。

Eduardo Nodarse

于2016年02月10日注册

4,782 声望

创作了5篇指南

团队

USF Tampa, Team 2-5, Sullivan Spring 2016 USF Tampa, Team 2-5, Sullivan Spring 2016 的会员

USFT-SULLIVAN-S16S2G5

4 名成员

创作了16篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 29

过去 30 天: 169

总计 23,886