跳转到主内容

简介

This guide will show you how to replace a dented or damaged bottom panel on an Asus ZenBook UX303U laptop.

  1. Remove the two round rubber feet at the hinge-edge of the laptop.
    • Remove the two round rubber feet at the hinge-edge of the laptop.

  2. Remove the eleven 4 mm Phillips #00 screws from the back panel.
    • Remove the eleven 4 mm Phillips #00 screws from the back panel.

  3. Using a plastic opening tool pry the back panel off of the laptop. Using a plastic opening tool pry the back panel off of the laptop.
    • Using a plastic opening tool pry the back panel off of the laptop.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Luis Perez

于2018年02月14日注册

496 信誉积分

创作了2篇指南

团队

USF Tampa, Team S3-G5, Nance Spring 2018 USF Tampa, Team S3-G5, Nance Spring 2018 的会员

USFT-NANCE-S18S3G5

3 名成员

创作了9篇指南

一条评论

Some models may utilize Phillips #00 screws, but mine (and many others based on what I’ve now read) utilize Torx T5 screws around the edges of the panel.

Nick Brennan - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 6

过去的30天: 59

总计 4,025