跳转到主内容

简介

If your system overheating, we show you how to disassemble it, clean the Cooling system and replace the CPU Thermal paste.

_______________ Video manual: _______________

视频概述

  1. Switch off the laptop and remove the battery.
    • Switch off the laptop and remove the battery.

  2. The Keyboard is held by 5x locking clips. Pick up a little the one side of the Keyboard and start opening the clips one by one. Disconnect the Keyboard flex cable from the mother board and remove the KB.
    • The Keyboard is held by 5x locking clips.

    • Pick up a little the one side of the Keyboard and start opening the clips one by one.

    • Disconnect the Keyboard flex cable from the mother board and remove the KB.

    • Please SUBSCRIBE to my channel ツ

  3. Remove 3x Philips screws. Disconnect the two small flex cables:
    • Remove 3x Philips screws.

    • Disconnect the two small flex cables:

    • Power On button flex cable

    • Touch pad flex cable

  4. Unscrew the two Philips screws and remove the HDD / RAM Cover. Remove three screws securing the hard drive caddy (hard drive assembly). Slide the hard drive assembly to the left to disconnect it from the motherboard.
    • Unscrew the two Philips screws and remove the HDD / RAM Cover.

    • Remove three screws securing the hard drive caddy (hard drive assembly).

    • Slide the hard drive assembly to the left to disconnect it from the motherboard.

  5. Disconnect the two coaxial antenna cables from the Wi-Fi card. Remove any Memory or Dummy card.
    • Disconnect the two coaxial antenna cables from the Wi-Fi card.

    • Remove any Memory or Dummy card.

  6. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  7. The bottom cover is held by 10x Phillips screws. Remove them. With a plastic tool separate the Upper cover and remove it. With a plastic tool separate the Upper cover and remove it.
    • The bottom cover is held by 10x Phillips screws. Remove them.

    • With a plastic tool separate the Upper cover and remove it.

  8. Disconnect: The Microphone cable The LCD Display flex cable
    • Disconnect:

    • The Microphone cable

    • The LCD Display flex cable

    • Remove 3x Pillips screws.

    • Lift the board first from the right edge.

    • There is another one cable, from the DC connector, connected to the underside of main board. We should spun the the board to disconnect the DC connector cable.

  9. ASUS X55C iCore with 4GB no board RAM motherboard, model: 60-N0OMB1100 Please SUBSCRIBE to my channel  ツ
  10. Disconnect the Fan cable from the Motherboard. Remove the screws (4x Phillips screws) that hold the cooling system to the Motherboard Remove the Cooling System carefully, if you don't want to break the CPU.
    • Disconnect the Fan cable from the Motherboard.

    • Remove the screws (4x Phillips screws) that hold the cooling system to the Motherboard

    • Remove the Cooling System carefully, if you don't want to break the CPU.

  11. Use a  lint-free cloth to clean the old thermal compound. If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off. Use again cloth with isopropyl alcohol to clean the Thermal surface.
    • Use a lint-free cloth to clean the old thermal compound.

    • If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off.

    • Use again cloth with isopropyl alcohol to clean the Thermal surface.

    • The Fan and Headsink are held together with a large black bar. Removing the tape at both ends, to separate the Fan from the Headsink.

    • Use a soft anti static brush and clean the Heatsink on the inside.

  12. Use the same technic to clean the surface of the processor from the old thermal compound Be carefully,if you don't want to break the CPU. Be carefully,if you don't want to break the CPU.
    • Use the same technic to clean the surface of the processor from the old thermal compound

    • Be carefully,if you don't want to break the CPU.

  13. Dispense a small amount of thermal compound and gently smear it over the entire processor surface. Dispense a small amount of thermal compound and gently smear it over the entire processor surface. Dispense a small amount of thermal compound and gently smear it over the entire processor surface.
    • Dispense a small amount of thermal compound and gently smear it over the entire processor surface.

  14. Careful install the Cooling system with even pressure from all sides, and the bead that you placed on the surface will spread over the entire contact surface. . .
    • Careful install the Cooling system with even pressure from all sides, and the bead that you placed on the surface will spread over the entire contact surface.

    • .

    • .

    • .

    • .

    • Did you do it successfully?

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

ZFix

于2013年12月09日注册

165,854 信誉积分

创作了305篇指南

团队

Master Techs Master Techs 的会员

Community

287 名成员

创作了815篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 8

过去的30天: 31

总计 4,235