跳转到主内容

简介

If you need to replace any portion of the upper part of your laptop: screen, webcam, etc. then you need to remove the screen frame first. This guide will show you how to do that.

  1. Using the tweezers, remove the 2 black plastic adhesive covers from the bottom corners of the screen frame. Using the tweezers, remove the 2 black plastic adhesive covers from the bottom corners of the screen frame.
    • Using the tweezers, remove the 2 black plastic adhesive covers from the bottom corners of the screen frame.

  2. Use the Philips #00 screwdriver to remove the 2 screws that were revealed in the previous step.
    • Use the Philips #00 screwdriver to remove the 2 screws that were revealed in the previous step.

    • The screws are 20 mm in diameter and 50 mm long.

  3. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  4. Using the plastic opening tool, pry the screen frame away from the screen.
    • Using the plastic opening tool, pry the screen frame away from the screen.

  5. Using your hands, grasp the screen frame at it's base near the laptop hinge.
    • Using your hands, grasp the screen frame at it's base near the laptop hinge.

    • While pulling the base of the screen frame away from the hinge horizontally, also lift up on the screen frame to disconnect it from the laptop hinge.

    • The space between the screen frame and laptop hinge is very small and the plastic for both parts is weak. However, a fair amount of force is required to disconnect the screen frame from the laptop hinge. Be careful during this step, or either of these plastic pieces may break.

结论

To reassemble your device, follow these instructions in reverse order.

Gregory Browne

于2017年10月19日注册

501 信誉积分

创作了5篇指南

团队

UMass Dartmouth, Team S3-G5, Bailey Fall 2017 UMass Dartmouth, Team S3-G5, Bailey Fall 2017 的会员

UMASSD-BAILEY-F17S3G5

2 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 8

总计 135