跳转到主内容

配件

没有特定配件。

  1. Remove the following six screws:
    • Remove the following six screws:

    • Six 4 mm Phillips #0 using a phillips scredriver

    • Remove the following one screw:

    • One 14 mm Phillips #0 using a phillips screwdriver

    • The 14mm screw goes in the center.

  2. Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.
    • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

  3. PC 笔记本电池

    所有顶级PC品牌的电池均以我们的质量保证为后盾。

    现在开始购物

    PC 笔记本电池

    所有顶级PC品牌的电池均以我们的质量保证为后盾。

    现在开始购物
  4. Take gold cap that connects to a black wire off using the metal spudger.
    • Take gold cap that connects to a black wire off using the metal spudger.

  5. Remove the following two screws:
    • Remove the following two screws:

    • Two 4 mm screws using Phillips #0 screwdriver.

  6. Slide the component up and out.
    • Slide the component up and out.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Vanessa Garcia

于2015年01月22日注册

1,558 信誉积分

创作了6篇指南

团队

Cal Poly, Team 21-24, Maness Winter 2015 Cal Poly, Team 21-24, Maness Winter 2015 的会员

CPSU-MANESS-W15S21G24

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 7

过去的30天: 25

总计 2,939