跳转到主内容

配件

没有特定配件。

  1. Remove the following six screws:
    • Remove the following six screws:

    • Six 4 mm Phillips #0 using a phillips scredriver

    • Remove the following one screw:

    • One 14 mm Phillips #0 using a phillips screwdriver

    • The 14mm screw goes in the center.

  2. Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.
    • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

  3. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  4. Remove the black foam and adhesive located on top of the hard drive.
    • Remove the black foam and adhesive located on top of the hard drive.

  5. Remove the following four screws:
    • Remove the following four screws:

    • Four 4 mm Phillips #0 using a phillips screwdriver.

  6. Slide out the hard drive
    • Slide out the hard drive

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Vanessa Garcia

于2015年01月22日注册

1,558 信誉积分

创作了6篇指南

团队

Cal Poly, Team 21-24, Maness Winter 2015 Cal Poly, Team 21-24, Maness Winter 2015 的会员

CPSU-MANESS-W15S21G24

4 名成员

创作了8篇指南

You FORGOT TO MENTION that one must remove the 2 Rubber feet to get at 2 more screws :-(((((((

Matthew Miller - 回复

Very poor!!! If you follow this instruction, you will destroy your Laptop. I did nearly destroying it. You did not show the 2 screws under the rubbers.

Minus 1000 points!!!

luft_ha - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 21

过去的30天: 60

总计 7,108