跳转到主内容

简介

If the laptop powers on when the charger is connected, but fails to power on or stay on when disconnected, then your battery may need to be replaced. This guide will show you how to replace the battery.

  1. Use a  metal spudger to pry the bottom panel open.
    • Use a metal spudger to pry the bottom panel open.

    • Be gentle around the edges.

    • Lift the back panel to expose the inside of the laptop.

  2. Using the same  Phillips #0  screwdriver,  remove the eight black 50mm screws  surrounding the battery. Using the same  Phillips #0  screwdriver,  remove the eight black 50mm screws  surrounding the battery.
    • Using the same Phillips #0 screwdriver, remove the eight black 50mm screws surrounding the battery.

  3. Using a set of precision tweezers,  lift the motherboard connector tab.
    • Using a set of precision tweezers, lift the motherboard connector tab.

  4. Use a nylon spudger or your fingers to gently pry the battery up. Remove the battery.
    • Use a nylon spudger or your fingers to gently pry the battery up.

    • Remove the battery.

    • Metal spudgers can puncture an unprotected battery, potentially causing a fire.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Shilo Stuart

于2017年04月12日注册

505 信誉积分

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 3

过去的30天: 12

总计 2,299