1. Flip the computer over so that it is upside down. Slide both latches away from each other (towards the outside).
    • Flip the computer over so that it is upside down.

    • Slide both latches away from each other (towards the outside).

    • Push the battery out with your fingers.

    • The actual battery is not shown in the photograph.

  2. Remove the two screws on the underside of the case.
    • Remove the two screws on the underside of the case.

    • These screws should should have a keyboard "K" symbol next to them.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Locate the little tabs above the INSERT, F10 and F1 keys, and between the F5 and F6 keys. Starting with the tab above the F1 key, press the tabs inward using your fingernail or spudger. Continue this process for the rest of the tabs. Once all four tabs have been released, the top half of the keyboard should be free.
    • Locate the little tabs above the INSERT, F10 and F1 keys, and between the F5 and F6 keys.

    • Starting with the tab above the F1 key, press the tabs inward using your fingernail or spudger. Continue this process for the rest of the tabs.

    • Once all four tabs have been released, the top half of the keyboard should be free.

  5. Pull the keyboard out at a 45 degree angle and place it upside down on the scroll pad. Pull the wide ribbon cable laterally from its socket on the motherboard.
    • Pull the keyboard out at a 45 degree angle and place it upside down on the scroll pad.

    • Pull the wide ribbon cable laterally from its socket on the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Steven

于2010年06月24日注册

32 信誉积分

创作了2篇指南

团队

Cal Poly, Team 2-9, Johann Summer 2010 Cal Poly, Team 2-9, Johann Summer 2010 的会员

CPSU-JOHANN-R10S2G9

5 名成员

创作了10篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 4,726