跳转到主内容
  1. Make sure power is off.
    • Make sure power is off.

    • Insert the plastic opening tool on the side of the tablet.

    • You can use a thin screw if you don't have an opening tool.

    • Gently pull upwards and carefully pry open the Transformer pad.

  2. Slide the tool along all four edges and continue to pull the tool upwards.
    • Slide the tool along all four edges and continue to pull the tool upwards.

  3. Remove the back cover once it is detached and set it aside.
    • Remove the back cover once it is detached and set it aside.

    • Rotate tablet to match picture.

  4. Carefully unplug rainbow cable from motherboard.
    • Carefully unplug rainbow cable from motherboard.

  5. Use plastic opening tool to carefully pry the battery out from frame.
    • Use plastic opening tool to carefully pry the battery out from frame.

  6. Use the +J000 screwdriver to remove screws four from speakers. Keep the screws together and organized. (Label, if necessary).
    • Use the +J000 screwdriver to remove screws four from speakers.

    • Keep the screws together and organized. (Label, if necessary).

  7. Take ground wire out from the top of TF103C-L(Left) speaker.
    • Take ground wire out from the top of TF103C-L(Left) speaker.

    • If you pull on the wire to much it will break off.

    • if you break the wire off you can solder it back on

  8. Remove the tape and unplug wire that attaches to both speakers from soundboard.
    • Remove the tape and unplug wire that attaches to both speakers from soundboard.

  9. Remove two speakers from frame. Remove two speakers from frame.
    • Remove two speakers from frame.

结论

To reassemble your device, follow these instructions in reverse order.

Tyler Ellis

于2015年10月28日注册

668 信誉积分

创作了4篇指南

团队

UMass Dartmouth, Team 3-6, Shastany Fall 2015 UMass Dartmouth, Team 3-6, Shastany Fall 2015 的会员

UMASSD-SHASTANY-F15S3G6

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 305