简介

Issues with the ports on the left side of the laptop can indicate that the IO board is in need of replacement. Follow this step by step guide to replace it yourself.

Remove the back 6mm and 8mm screws with a phillips head J000 screwdriver.
  • Remove the back 6mm and 8mm screws with a phillips head J000 screwdriver.

添加评论

Remove the back cover of the flip book by gently using a metal spudger.
  • Remove the back cover of the flip book by gently using a metal spudger.

添加评论

  • Unscrew the battery from the motherboard using a phillips head J000 screwdriver on the 3mm screws.

添加评论

  • The battery comes attached to the motherboard and needs to be disconnected before you can remove it.

  • Disconnect the battery from the motherboard by gently pulling out the connection with tweezers.

添加评论

  • The IO Board will be the section of circuitry to the left. It's held down by a couple of 3mm and 6mm screws and some device connections.

  • Unscrew the 3mm and 6mm screws on the IO Board with a phillips head J000 screwdriver.

添加评论

  • After unscrewing, gently unplug all the connections to the IO Board with tweezers. We have highlighted where these connections are located in our images.

添加评论

  • Remove the final connections from the IO board with tweezers.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Alejandro Lopez

于2018年02月15日注册

605 信誉积分

创作了5篇指南

团队

USF Tampa, Team S17-G2, Boczar Spring 2018 USF Tampa, Team S17-G2, Boczar Spring 2018 的会员

USFT-BOCZAR-S18S17G2

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 5

过去的30天: 15

总计 104