Asus TUF Gaming FX505DY Heat Sink & Fan Replacement

步骤 1 Back Case

• Turn off the laptop.
• Disconnect the charging cable.
• Failure to disconnect the charging cable and power down the computer could result in personal or property damage.
• Flip the laptop so the back is facing up.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2



• Use a Phillips #1 screwdriver to remove the five 6 mm screws that secure the back panel.
• Use the same screwdriver to remove the six 13 mm screws securing the back panel.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
• Insert the plastic opening tool at a corner and pry up along the edges, leaving the back side with the hinges for last.
• Do not insert the opening tool too far into the laptop to avoid damaging internal components.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 4
• Gently lift up the back panel to release any remaining clips on the side with the hinges and remove the panel.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 5 Heat Sink & Fan
• With a Phillips 0-bit screwdriver, remove eight 5.0 mm screws on the silver brackets
• With a Phillips 0-bit screwdriver, remove two 5.0 mm screws holding the edge of the fans in place
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 6
• Disconnect two power cables connecting fans to the motherboard.
• Once all cables and screws are removed, carefully lift up and remove the fans and heat sink
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论

作者

与3其他贡献者

Sebastian Frederick Klincewicz

于10/04/22注册

394 声望

创作了3篇指南

徽章: 7

• 
• 
• 

+ 4更多徽章

团队

The Citadel Military College of South Carolina, Team 3-19, Eggleston Fall 2022 The Citadel Military College of South Carolina, Team 3-19, Eggleston Fall 2022 的会员

CMCSC-EGGLESTON-F22S3G19

2 名成员

创作了3篇指南

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

预览