跳转到主内容

简介

This guide will help you locate and replace your hard drive on your computer.

  1. Lift the rubber cover found on the bottom of the laptop. Remove the 5.2 mm screw with a Phillips 1 Screwdriver.
    • Lift the rubber cover found on the bottom of the laptop.

    • Remove the 5.2 mm screw with a Phillips 1 Screwdriver.

  2. Use the black nylon spudger to pry the back panel off the laptop. Use the black nylon spudger to pry the back panel off the laptop. Use the black nylon spudger to pry the back panel off the laptop.
    • Use the black nylon spudger to pry the back panel off the laptop.

  3. Use a Phillips 1 Screwdriver to remove the four 2.4 mm screws securing the hard drive. Use the black pull-tab located on the shell covering the hard drive, to lift the hard drive housing and pull the hard drive away from the connector. To access the hard drive on the right side of the laptop, perform the same steps, but on hard drive casing to the right of the previous hard drive.
    • Use a Phillips 1 Screwdriver to remove the four 2.4 mm screws securing the hard drive.

    • Use the black pull-tab located on the shell covering the hard drive, to lift the hard drive housing and pull the hard drive away from the connector.

    • To access the hard drive on the right side of the laptop, perform the same steps, but on hard drive casing to the right of the previous hard drive.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Vincent Guarino

于2018年01月22日注册

190 信誉积分

撰写一个指南

团队

Cal Poly, Team S16-G1, Banghart Winter 2018 Cal Poly, Team S16-G1, Banghart Winter 2018 的会员

CPSU-BANGHART-W18S16G1

4 名成员

创作了22篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 3

总计 307