简介

This guide will show you how to replace the back panel on the ASUS ROG G53SW-XT1

  1. Unplug the power cable and flip the computer over.
    • Unplug the power cable and flip the computer over.

  2. Unlock the battery by pushing the switch to the right.
    • Unlock the battery by pushing the switch to the right.

    • Push and hold the left switch, then pull the battery out.

    • Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard.

    • Disconnect the keyboard ribbon cables from the motherboard.

    • Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free.

    • Remove the fourteen Phillips #0 screws.

    • Flip the laptop over and pull off the bottom cover.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

scott smith

于2018年02月12日注册

106 信誉积分

撰写一个指南

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 9

总计 106