跳转到主内容

简介

This guide is for replacing a broken of faulty keyboard.

  1. Flip the laptop over so that the back panel is facing up. Carefully remove the eight 5.7mm  screws on the back panel using a Phillips #1 screwdriver. Carefully remove the eight 5.7mm  screws on the back panel using a Phillips #1 screwdriver.
    • Flip the laptop over so that the back panel is facing up.

    • Carefully remove the eight 5.7mm screws on the back panel using a Phillips #1 screwdriver.

  2. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  3. Turn the laptop upright and flip the screen open. Using the plastic opening tool, gently pry the keyboard panel off of the base.
    • Turn the laptop upright and flip the screen open.

    • Using the plastic opening tool, gently pry the keyboard panel off of the base.

  4. Gently raise the keyboard from the base  enough to access the underside. Gently pull up on the locking tab to release the ribbon cable. This should take no force to complete.
    • Gently raise the keyboard from the base enough to access the underside.

    • Gently pull up on the locking tab to release the ribbon cable. This should take no force to complete.

    • Remove the keyboard.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Drew Singleton

于2018年08月31日注册

347 信誉积分

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 7

总计 139