跳转到主内容

简介

If your entire keyboard is faulty, you can easily and quickly replace it yourself. The only tool needed to replace your keyboard is your blue prying tool.

配件

没有特定配件。

  1. Turn off the device. Disconnect the charging cable if applicable. Push the two locking mechanisms away from the center of the device and slowly remove the battery.
    • Turn off the device.

    • Disconnect the charging cable if applicable.

    • Push the two locking mechanisms away from the center of the device and slowly remove the battery.

  2. Insert the blue prying tool into each of the five tabs at the top of your keyboard, moving from the outer edge inward. Use the blue prying tool to separate the keyboard from the palm rest. Use your hand to gently pull the keyboard away from the laptop. Use your hand to gently pull the keyboard away from the laptop.
    • Insert the blue prying tool into each of the five tabs at the top of your keyboard, moving from the outer edge inward. Use the blue prying tool to separate the keyboard from the palm rest.

    • Use your hand to gently pull the keyboard away from the laptop.

  3. As the keyboard comes loose, gently lift the board up so the bottom is exposed The base of the keyboard will be tethered to the device by a piece of silver cable ribbon. Tearing this piece away from the keyboard quickly can damage the device.
    • As the keyboard comes loose, gently lift the board up so the bottom is exposed

    • The base of the keyboard will be tethered to the device by a piece of silver cable ribbon. Tearing this piece away from the keyboard quickly can damage the device.

    • Use your fingers to gently disconnect the silver cable ribbon from the palm rest.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Graham Rumbaugh

于2016年10月28日注册

137 信誉积分

撰写一个指南

团队

UW Tacoma, Team 1-3, Rose Fall 2016 UW Tacoma, Team 1-3, Rose Fall 2016 的会员

UWT-ROSE-F16S1G3

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 4

过去的30天: 15

总计 970