跳转到主内容

简介

If you need to replace the motherboard of your Asus G55VW DS71 laptop, follow this guide.

It's an important part of your system, but getting to know when to upgrade your motherboard isn't always easy. Although replacing the motherboard can be costly, it can provide you with benefits in terms of speed, hardware support, and improved graphics support.

Prior to beginning the repair, be sure to power off your laptop and unplug it from the charging cord.

配件

没有特定配件。

  1. Make sure the computer is off and turn it over on its back. Push the slider all the way back until the compartment for the battery opens. Remove the battery and place it aside. Make sure the computer is off and turn it over on its back. Push the slider all the way back until the compartment for the battery opens. Remove the battery and place it aside.
    • Make sure the computer is off and turn it over on its back. Push the slider all the way back until the compartment for the battery opens. Remove the battery and place it aside.

  2. Find the panel on the back of the computer. Use a Phillips #0 screwdriver to unscrew the 2 4.2mm screws on that panel. Next, lift up the panel at the indent and place it aside. Find the panel on the back of the computer. Use a Phillips #0 screwdriver to unscrew the 2 4.2mm screws on that panel. Next, lift up the panel at the indent and place it aside.
    • Find the panel on the back of the computer. Use a Phillips #0 screwdriver to unscrew the 2 4.2mm screws on that panel. Next, lift up the panel at the indent and place it aside.

  3. When the back panel is removed, disconnect the blue and black ribbon connectors exposed from the back panel.
    • When the back panel is removed, disconnect the blue and black ribbon connectors exposed from the back panel.

  4. Remove the fifteen 4.2 mm screws on the bottom of the laptop with a Phillips #0 screwdriver, under the battery, and beneath the back panel that secure the keyboard to the laptop.
    • Remove the fifteen 4.2 mm screws on the bottom of the laptop with a Phillips #0 screwdriver, under the battery, and beneath the back panel that secure the keyboard to the laptop.

    • The top-left and upper center screws are difficult to reach with the iFixit screw kit.

  5. Begin to pry the keyboard off of the laptop with the pointed metal spudger. It is possible to damage yourself as well as the device with the metal spudgers. Exercise extreme caution.
    • Begin to pry the keyboard off of the laptop with the pointed metal spudger.

    • It is possible to damage yourself as well as the device with the metal spudgers. Exercise extreme caution.

  6. Remove the ribbon connectors that connect the keyboard to the motherboard. The keyboard should now be completely disconnected from the laptop. Remove the ribbon connectors that connect the keyboard to the motherboard. The keyboard should now be completely disconnected from the laptop. Remove the ribbon connectors that connect the keyboard to the motherboard. The keyboard should now be completely disconnected from the laptop.
    • Remove the ribbon connectors that connect the keyboard to the motherboard. The keyboard should now be completely disconnected from the laptop.

  7. Placing your hand on the side of the disk drive closest to the motherboard, slightly push down and out to remove the drive.
    • Placing your hand on the side of the disk drive closest to the motherboard, slightly push down and out to remove the drive.

  8. In this step, remove the nine 4.2 mm screws that hold the motherboard to the laptop itself using the Phillips #0 screwdriver.
    • In this step, remove the nine 4.2 mm screws that hold the motherboard to the laptop itself using the Phillips #0 screwdriver.

    • Take the motherboard gently from the laptop.

  9. In order to get to some screws on the motherboard, the monitor needs to be moved. On the right side of the computer there should be a panel that is connecting the monitor to the computer. Use a Phillips #0 screwdriver to remove each screw.
    • In order to get to some screws on the motherboard, the monitor needs to be moved.

    • On the right side of the computer there should be a panel that is connecting the monitor to the computer. Use a Phillips #0 screwdriver to remove each screw.

  10. Pull out the 2 wires connecting the  monitor to the computer. Pull out the 2 wires connecting the  monitor to the computer.
    • Pull out the 2 wires connecting the monitor to the computer.

  11. Push the monitor away in order to clear up space for the 2 screws and unscrew them.
    • Push the monitor away in order to clear up space for the 2 screws and unscrew them.

  12. Disconnect the black and white wires from the motherboard slowly.
    • Disconnect the black and white wires from the motherboard slowly.

  13. Before taking the motherboard out, make sure that all the screws were removed. Then, remove the motherboard from the body of the laptop gently. The exhaust vent for the fans are snapped into the body of the laptop. Exercise caution when removing the motherboard.
    • Before taking the motherboard out, make sure that all the screws were removed. Then, remove the motherboard from the body of the laptop gently.

    • The exhaust vent for the fans are snapped into the body of the laptop. Exercise caution when removing the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Andres Santiesteban

于2018年09月26日注册

375 信誉积分

创作了3篇指南

一条评论

Great post , I'm getting a second hand laptop like this. This really help. Thank you.

Lim Lim - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 27

总计 804