Slide the battery's locking tabs from the locked position to unlocked positions.
  • Slide the battery's locking tabs from the locked position to unlocked positions.

    • The right tab is unlocked when a red dot is showing.

    • The left tab will have to be held in the unlocked position in order to release the battery.

添加评论

Slide the battery out while holding the left locking tab in the unlocked position.
  • Slide the battery out while holding the left locking tab in the unlocked position.

添加评论

  • Identify the RAM and hard drive compartment on the back of the laptop and locate the two screws holding it in place.

  • There may be a sticker covering one of the screws. If not, proceed to step 5.

添加评论

  • Remove the sticker with your hand or a tweezer.

添加评论

  • Remove the two 4.76 mm Phillips #0 screws.

添加评论

  • Carefully open up the cover from the bottom with a plastic opening tool.

添加评论

  • Remove the back cover.

添加评论

  • Identify the RAM (the bottom chip)

    • It is held in place by two pins

添加评论

  • Use a spudger to push the end of the small metal clip on the right towards the right.

  • Now push the end of the small metal clip on the left towards the left.

  • The RAM should pop up.

添加评论

  • Remove the RAM by pulling it upwards.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Brian Carreon

于2012年01月25日注册

171 信誉积分

创作了2篇指南

团队

Cal Poly, Team 3-27, Amido Winter 2012 Cal Poly, Team 3-27, Amido Winter 2012 的会员

CPSU-AMIDO-W12S3G27

4 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 9

过去的30天: 31

总计 7,048