配件

无需配件。

Slide the battery's locking tabs from the locked position to unlocked positions. The right tab is unlocked when a red dot is showing. The left tab will have to be held in the unlocked position in order to release the battery.
  • Slide the battery's locking tabs from the locked position to unlocked positions.

    • The right tab is unlocked when a red dot is showing.

    • The left tab will have to be held in the unlocked position in order to release the battery.

添加评论

Slide the battery out while holding the left locking tab in the unlocked position.
  • Slide the battery out while holding the left locking tab in the unlocked position.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Caution Follow this step to detach the upper portion of the keyboard, but do not remove it from the laptop. Damage to the keyboard's ribbon cable may result if improperly executed. Identify the three metal tabs holding down the laptop's keyboard.
  • Caution Follow this step to detach the upper portion of the keyboard, but do not remove it from the laptop. Damage to the keyboard's ribbon cable may result if improperly executed.

  • Identify the three metal tabs holding down the laptop's keyboard.

  • Using a spudger, depress each metal tab to remove the keyboard.

    • The upper part of the keyboard should "pop up" from its holder.

添加评论

Clips hold the bottom portion of the keyboard to the laptop. Gently lift the upper portion of the keyboard and then move the entire keyboard towards the computer's screen until the ribbon cable is visible. Clips hold the bottom portion of the keyboard to the laptop. Gently lift the upper portion of the keyboard and then move the entire keyboard towards the computer's screen until the ribbon cable is visible.
  • Clips hold the bottom portion of the keyboard to the laptop. Gently lift the upper portion of the keyboard and then move the entire keyboard towards the computer's screen until the ribbon cable is visible.

添加评论

Using a spudger, gently push the two black pins holding the ribbon cable towards the computer's screen.
  • Using a spudger, gently push the two black pins holding the ribbon cable towards the computer's screen.

  • Slide the keyboard's ribbon cable from the connector.

添加评论

Remove the keyboard by lifting upwards.
  • Remove the keyboard by lifting upwards.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

Sheldon Chu

于2012年01月24日注册

769 信誉积分

创作了6篇指南

团队

Cal Poly, Team 3-27, Amido Winter 2012 Cal Poly, Team 3-27, Amido Winter 2012 的会员

CPSU-AMIDO-W12S3G27

4 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 9

过去的30天: 22

总计 8,387