修复你的物品 社区 商店

Asus Eee PC 1201N Display Replacement

简介

A faulty display is a very possible issue people have with their computers. If yours is faulty follow this guide to replace it in your Asus Eee PC 1201N.

你所需要的

  1. Asus Eee PC 1201N Display Replacement, Battery: 步骤 1 中的图像 1，1

    • Flip the netbook over.

    • Be sure to unplug the netbook and power off the device while working.

    编辑

  2. Asus Eee PC 1201N Display Replacement: 步骤 2 中的图像 1，1

    • Push open both tabs on either side of the battery.

    • The tab on the left will click open and stay in place until you close it.

    编辑

  3. Asus Eee PC 1201N Display Replacement: 步骤 3 中的图像 1，1

    • Pull the tab on the right open, while you remove battery with your other hand.

    • Pull the battery straight out ensuring that you don't damage any connectors.

    编辑

  5. Asus Eee PC 1201N Display Replacement, Display: 步骤 4 中的图像 1，2 Asus Eee PC 1201N Display Replacement, Display: 步骤 4 中的图像 2，2

    • Remove the six screw on the front cover by using the plastic opening tool. Then, remove the six 4.6mm screws using the J0 Phillips head screwdriver.

    编辑

  6. Asus Eee PC 1201N Display Replacement: 步骤 5 中的图像 1，1

    • Using the plastic opening tool, separate the over from the netbook.

    编辑

  7. Asus Eee PC 1201N Display Replacement: 步骤 6 中的图像 1，1

    • You must separate the hinge cover from the cover before removing the cover.

    编辑

  8. Asus Eee PC 1201N Display Replacement: 步骤 7 中的图像 1，1

    • After removing the cover, remove the two 4.6mm screws using the J0 Phillips head screwdriver.

    编辑

  9. Asus Eee PC 1201N Display Replacement: 步骤 8 中的图像 1，1

    • There are two screws on the left and right side of the display. Remove all four 3mm screws using the J0 Phillips head to separate the LCD from the display cover.

    • The left side will have a magnet covering the bottom screw remove the magnet. Be sure to replace when reassembling.

    编辑

  10. Asus Eee PC 1201N Display Replacement: 步骤 9 中的图像 1，1

    • Pull up on the video cable on the back of the LCD display to remove it.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Mohamed Al Mardhouf Al Saadi

于10/04/16注册

133 声望

撰写一个指南

徽章: 3

团队

USF Tampa, Team 2-3, Nance Fall 2016 USF Tampa, Team 2-3, Nance Fall 2016 的会员

USFT-NANCE-F16S2G3

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 5

总计 595