简介

The RAM is located under the plastic casing of the laptop. Before starting the guide, make sure the laptop's charger is not plugged in.

配件

无需配件。

  1. Start by having the laptop upside down on a hard flat surface.
    • Start by having the laptop upside down on a hard flat surface.

    • Find and unscrew the 6.65 mm Phillips #1 screw.

    • The screw will not detach from the RAM cover.

    添加评论

  2. Carefully remove the cover by lifting it with your fingers.
    • Carefully remove the cover by lifting it with your fingers.

    • Make sure that you do not pull the cover to quickly or too hard as this could damage the plastic pins that hold the cover on.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Identify the pins on both sides of the RAM.

    • Using both hands, pull the pins apart from each other to release the RAM.

    • The RAM will "pop" up on its own after the pins are pressed.

    添加评论

    • Grab the RAM stick with two fingers and gently pull it out of its slot.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Aaron Arenas

于2014年04月20日注册

667 信誉积分

创作了5篇指南

团队

Cal Poly, Team 13-32, Maness Spring 2014 Cal Poly, Team 13-32, Maness Spring 2014 的会员

CPSU-MANESS-S14S13G32

5 名成员

创作了5篇指南

Everything I've read says you can only upgrade from the 1gb ram to a 2gig. Here's what I just installed: http://amzn.to/2x0flty and so far its working great...I notice a difference in speed, although this thing is still slow.

Dan Fowler - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 552