Skip to main content

介绍

Use this guide to replace the screen of the Replace the screen on your Asus Eee PC 1005HA laptop.

  1. Lay the laptop upside down.
    • Lay the laptop upside down.

    • Locate the two battery lock tabs.

  2. Slide the tabs outward to unlock the battery. The left tab will remain unlocked, while the right tab must be held. Holding the right tab open, slide the battery out of the laptop.
    • Slide the tabs outward to unlock the battery.

    • The left tab will remain unlocked, while the right tab must be held.

    • Holding the right tab open, slide the battery out of the laptop.

  3. Using tweezers, remove the six screw covers on the screen bezel. Remove the six 4.6 mm screws from the bezel. Remove the six 4.6 mm screws from the bezel.
    • Using tweezers, remove the six screw covers on the screen bezel.

    • Remove the six 4.6 mm screws from the bezel.

  4. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  5. Use a plastic opening tool to disengage the plastic clips that secure the screen bezel to the display.
    • Use a plastic opening tool to disengage the plastic clips that secure the screen bezel to the display.

    • Carefully remove the bezel from the display.

  6. Remove the four 3.6 mm screws securing the screen. Slowly lift the screen up from the rest of the laptop. The screen is still attached to the laptop by a set of cables. Be careful not to damage them while removing the screen.
    • Remove the four 3.6 mm screws securing the screen.

    • Slowly lift the screen up from the rest of the laptop.

    • The screen is still attached to the laptop by a set of cables. Be careful not to damage them while removing the screen.

  7. Remove the plastic tape securing the display cables to the back of the screen. Slide the display cable connector out its socket on the back of the screen.
    • Remove the plastic tape securing the display cables to the back of the screen.

    • Slide the display cable connector out its socket on the back of the screen.

  8. Remove the four 3.1 mm housing screws on the sides of the display housing frame Remove the housing frame.
    • Remove the four 3.1 mm housing screws on the sides of the display housing frame

    • Remove the housing frame.

结论

To reassemble your device, follow these instructions in reverse order.

12等其他人完成本指南。

Mitchell Cesare

于2012年01月31日注册

743 Reputation

创作了4篇指南

Team

Cal Poly, Team 11-22, Maness Winter 2012 Cal Poly, Team 11-22, Maness Winter 2012 的会员

CPSU-MANESS-W12S11G22

3 名成员

创作了12篇指南

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 16

Past 30 Days: 39

All Time: 19,202