修复你的物品 社区 商店

Astak Mole Motherboard Replacement

简介

In order to replace the motherboard, you are going to have to access it first. After that, you will have to separate everything from the old motherboard and reconnect everything to the new motherboard.

你所需要的

  1. Astak Mole Motherboard Replacement, Lower Case: 步骤 1 中的图像 1，1

    • Remove the four bottom tabs in order to access the bottom screws.

    编辑

  2. Astak Mole Motherboard Replacement: 步骤 2 中的图像 1，1

    • Remove all four 14 mm Phillips #1 screws.

    编辑

  3. Astak Mole Motherboard Replacement: 步骤 3 中的图像 1，1

    • Remove the SD card.

    编辑

  5. Astak Mole Motherboard Replacement: 步骤 4 中的图像 1，1

    • Pry up the motherboard on the four points using a spudger.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

    编辑

  6. Astak Mole Motherboard Replacement: 步骤 5 中的图像 1，1

    • Gently pull back the motherboard to expose many of the component's wired connections.

    编辑

  7. Astak Mole Motherboard Replacement, Motherboard: 步骤 6 中的图像 1，2 Astak Mole Motherboard Replacement, Motherboard: 步骤 6 中的图像 2，2

    • Sever the indicated adhesive connections to the motherboard allowing the wired connections to be removed.

    • All wired connections to the motherboard are removed by the thin plastic male connector inserted into the larger female plastic connection.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

    编辑

  8. Astak Mole Motherboard Replacement: 步骤 7 中的图像 1，2 Astak Mole Motherboard Replacement: 步骤 7 中的图像 2，2

    • The red wires may be adhered to the CPU as indicated and will need to be severed as shown.

    • Be careful not to scratch the CPU in this step. This is not a wired connection.

    • Sever the additional adhesive connections so that the wired connections may be removed.

    编辑

  9. Astak Mole Motherboard Replacement: 步骤 8 中的图像 1，1

    • Locate and unscrew the indicated screw using the (PH1) Phillips head bit.

    • Screw Measurements: (Length= 5.3mm)

    编辑

  10. Astak Mole Motherboard Replacement: 步骤 9 中的图像 1，2 Astak Mole Motherboard Replacement: 步骤 9 中的图像 2，2

    • Remove the last two wired connections to the motherboard by severing the indicated connections.

    • Lift up the secondary motherboard as indicated using the metal spudger.

    • All connections should be severed from the motherboard and a new motherboard may be inserted.

    • It is advised to reapply adhesive to wired connections during reassembly.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Andrew Birch

于09/15/16注册

204 声望

创作了2篇指南

徽章: 8

+ 5更多徽章

团队

USF Tampa, Team 2-2, Blackwell Fall 2016 USF Tampa, Team 2-2, Blackwell Fall 2016 的会员

USFT-BLACKWELL-F16S2G2

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 4

过去 30 天： 14

总计 455