跳转到主内容

Astak Mole Antenna Replacement

你所需要的

  1. Astak Mole Antenna Replacement, Lower Case: 步骤 1 中的图像 1,1
    • Remove the four bottom tabs in order to access the bottom screws.

  2. Astak Mole Antenna Replacement: 步骤 2 中的图像 1,1
    • Remove all four 14 mm Phillips #1 screws.

  3. Astak Mole Antenna Replacement: 步骤 3 中的图像 1,1
    • Remove the SD card.

  4. Astak Mole Antenna Replacement: 步骤 4 中的图像 1,1
    • Pry up the motherboard on the four points using a spudger.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  5. Astak Mole Antenna Replacement: 步骤 5 中的图像 1,1
    • Gently pull back the motherboard to expose many of the component's wired connections.

  6. Astak Mole Antenna Replacement, Antenna: 步骤 6 中的图像 1,2 Astak Mole Antenna Replacement, Antenna: 步骤 6 中的图像 2,2
    • Unscrew the antenna in a counter-clockwise rotation.

  7. Astak Mole Antenna Replacement: 步骤 7 中的图像 1,1
    • Take out the screw holding the antenna wire with the PH1 size Phillips head bit.

    • Screw length: 5.3mm

  8. Astak Mole Antenna Replacement: 步骤 8 中的图像 1,1
    • Gently pry open the circuit board attached to the antenna wire using a metal spudger.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  9. Astak Mole Antenna Replacement: 步骤 9 中的图像 1,1
    • Remove the antenna female end from the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

团队

USF Tampa, Team 2-2, Blackwell Fall 2016 USF Tampa, Team 2-2, Blackwell Fall 2016 的会员

USFT-BLACKWELL-F16S2G2

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 5

过去 30 天: 10

总计 444