修复你的物品 社区 商店

Art Tube MP AMP 12 AX7A Tube Replacement

简介

I will show in this Guide how to replace the 12 AX7A Tube in your Tube Art MP easily and without complications.

你所需要的

  1. Art Tube MP AMP 12 AX7A Tube Replacement, 12 AX7A Tube: 步骤 1 中的图像 1，2 Art Tube MP AMP 12 AX7A Tube Replacement, 12 AX7A Tube: 步骤 1 中的图像 2，2

    • Loosen the 4 screws sideways the device, using a PH1

    翻译

  2. Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 2 中的图像 1，3 Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 2 中的图像 2，3 Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 2 中的图像 3，3

    • Use the Smart Wrench to loosen the two In- and Output controllers. Attach the Smart Wrench below the controller.

    • Be careful not to damage the surface.

    • Now you can lift up the top of the device, and the mainboard appears.

    翻译

  4. Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 3 中的图像 1，1

    • Use the Smart Wrench again to loosen the cinch ports on the backside.

    • Attention! Do not lose the washers located at the in- and outside. Two pieces each.

    翻译

  5. Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 4 中的图像 1，3 Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 4 中的图像 2，3 Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 4 中的图像 3，3

    • Use the PH 1 to unscrew 2 screws on the motherboard.

    • Now you can take the board out completely

    • Attention: There are again 2 washers.

    翻译

  6. Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 5 中的图像 1，3 Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 5 中的图像 2，3 Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 5 中的图像 3，3

    • Carefully bend the tube up to get a better view

    • Remove the tube with a cloth from the socket, a metal spudger can help

    • Insert the new tube

    • Use cloth so that no residues accumulate on the surface.

    翻译

  7. Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 6 中的图像 1，3 Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 6 中的图像 2，3 Art Tube MP AMP 12 AX7A Tube Replacement: 步骤 6 中的图像 3，3

    • Finally just reassemble all parts.

    • Be careful to tighten all the screws and ports, otherwise internal vibrations could cause damage to your device.

    • First put the cinch ports in to get the mainboard back in place.

    翻译
结论

Congratulations you did it :)

3等其他人完成本指南。

由衷感谢以下译者：

de en

100%

Alex Krug

irlanda

这些译者帮助我们修补全世界！ 您也想加入吗？
开始翻译 ›

作者

与3其他贡献者

Alex Krug

于12/23/16注册

38,185 声望

撰写一个指南

徽章: 9

+ 6更多徽章

3条评论

Only replace the fuse? Is that the only part that usually breaks?

Raoul B. - 回复

A tube replacement for this device is not necessarily meant for broken tubes. Most people do it for altering the sound. There is still a modification manual on the web for changing most of the parts like resistors, capacitors and ICs for higher quality.

Holger Klos - 回复

I didn’t find it necessary to remove the motherboard to replace the tube. The card where the tube socket is located is connected to the main board with two cables. That board may be lifted clear of the chassis just by extending those cables.

Greg Baker - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 12

过去 30 天： 53

总计 2,912