修复你的物品 社区 商店

ArmorAll AA255 Power Cord Replacement

简介

Unplug the vacuum before repair. The cord is easily disconnected and replaced once the vacuum is disassembled adequately.

你所需要的

  1. ArmorAll AA255 Power Cord Replacement, Lower Motor Housing: 步骤 1 中的图像 1，1

    • Remove the orange main housing unit from the vacuum bucket by pulling outward on the handle tabs while lifting upward as shown.

    编辑

  2. ArmorAll AA255 Power Cord Replacement: 步骤 2 中的图像 1，1

    • Remove the five 15mm PH2 screws.

    编辑

  3. ArmorAll AA255 Power Cord Replacement: 步骤 3 中的图像 1，1

    • Remove the 15 mm T20 screw. This screw is located nearest the power cord.

    编辑

  5. ArmorAll AA255 Power Cord Replacement: 步骤 4 中的图像 1，2 ArmorAll AA255 Power Cord Replacement: 步骤 4 中的图像 2，2

    • Gently separate the upper and lower sections of the main housing.

    编辑

  6. ArmorAll AA255 Power Cord Replacement, Power Cord: 步骤 5 中的图像 1，1

    • Pull the black wire from the power cord out of the switch.

    • There are no clips or tabs that hold this wire in place. Just pull strongly to remove it.

    • Don't remove both black wires. Only the black wire that comes from the power cord itself needs to be removed. The one going to the motor can be left alone.

    编辑

  7. ArmorAll AA255 Power Cord Replacement: 步骤 6 中的图像 1，1

    • Remove the five 15mm screws from the plastic motor cover and power cord clamp using a PH2 screwdriver.

    编辑

  8. ArmorAll AA255 Power Cord Replacement: 步骤 7 中的图像 1，2 ArmorAll AA255 Power Cord Replacement: 步骤 7 中的图像 2，2

    • Remove the plastic motor cover.

    • Be sure to loosen the white wire from the notch in the plastic motor cover by pulling it upwards.

    编辑

  9. ArmorAll AA255 Power Cord Replacement: 步骤 8 中的图像 1，2 ArmorAll AA255 Power Cord Replacement: 步骤 8 中的图像 2，2

    • Detach the white wire from the motor by pulling upwards on the wire as you depress the small metal tab on the connector with a nylon spudger.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与2其他贡献者

Abel Manring

于02/10/16注册

263 声望

撰写一个指南

徽章: 14

+ 11更多徽章

团队

IUPUI, Team 2-1, Baechle Spring 2016 IUPUI, Team 2-1, Baechle Spring 2016 的会员

IUPUI-BAECHLE-S16S2G1

4 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 9

过去 30 天： 17

总计 979