跳转到主内容

简介

Time and general wear and tear of the Apple TV can cause damage to the bottom cover. This guide will show how to replace the bottom cover on the Apple TV 2nd generation device.

配件

没有特定配件。

  1. As the Apple TV doesn’t have any visible screws or points of entry, the first step is to use a couple of metal spudger   to carefully loosen and remove the rubber base/bottom cover from the upper case.
    • As the Apple TV doesn’t have any visible screws or points of entry, the first step is to use a couple of metal spudger to carefully loosen and remove the rubber base/bottom cover from the upper case.

  2. Position the replacement base over the exposed interior of the Apple TV. Gently press the cover down into the Apple TV until the interior tabs snap into place and the base is attached securely to the upper case.
    • Position the replacement base over the exposed interior of the Apple TV. Gently press the cover down into the Apple TV until the interior tabs snap into place and the base is attached securely to the upper case.

结论

To reassemble your device, follow these instructions in reverse order.

Areej Bashawiri

于2017年09月28日注册

201 信誉积分

创作了2篇指南

团队

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 14

总计 322