跳转到主内容

简介

How to remove and replace the logic board. The logic board is like the main cpu of the display.

配件

没有特定配件。

  1. Apple Studio Display M7649 Logic Board Replacement, Stand: 步骤 1 中的图像 1,2 Apple Studio Display M7649 Logic Board Replacement, Stand: 步骤 1 中的图像 2,2
    • Lay the display facing down with the stand away from you.

    • Remove the three size 2.0 hex screws on the swing arm and remove the swing arm as well as the plastic shield under it.

  2. Apple Studio Display M7649 Logic Board Replacement, Panels: 步骤 2 中的图像 1,1
    • Remove the size 2.5 hex screws from each corner that connects the panels to the display and remove them.

  3. Apple Studio Display M7649 Logic Board Replacement: 步骤 3 中的图像 1,1
    • Rotate the display so the legs of the display are now facing you

    • Grip the top of the clear panel and lift it upwards, and pull the ADC cable through the hole.

  4. Apple Studio Display M7649 Logic Board Replacement: 步骤 4 中的图像 1,1
    • Remove the grey back panel by lifting the bottom and pulling the ADC cable through the hole.

  5. Apple Studio Display M7649 Logic Board Replacement, Metal EMI Shield: 步骤 5 中的图像 1,1
    • The next layer will be a shiny metal panel, which might have some stickers. Make sure to remove these stickers.

  6. Apple Studio Display M7649 Logic Board Replacement: 步骤 6 中的图像 1,1
    • Now locate and remove the lone Phillips screw holding the EMI shield to the display

  7. Apple Studio Display M7649 Logic Board Replacement: 步骤 7 中的图像 1,2 Apple Studio Display M7649 Logic Board Replacement: 步骤 7 中的图像 2,2
    • Now that the screw has been removed, slide the panel towards your body and lift it out.

    • You may need to remove the clear USB port cover to remove the metal EMI shield.

  8. Apple Studio Display M7649 Logic Board Replacement, Logic Board: 步骤 8 中的图像 1,1
    • Remove the four screws holding the logic board to the display

  9. Apple Studio Display M7649 Logic Board Replacement: 步骤 9 中的图像 1,1
    • Remove these seven cables connected to the logic board.

    • There is an extra connection that no cable plugs into. This connection is for Apple to test their logic boards

  10. Apple Studio Display M7649 Logic Board Replacement: 步骤 10 中的图像 1,1
    • Remove and replace the logic board.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Andrew Tsao

于2010年01月19日注册

171 信誉积分

创作了5篇指南

团队

Cal Poly, Team 3-20, Maness Winter 2010 Cal Poly, Team 3-20, Maness Winter 2010 的会员

CPSU-MANESS-W10S3G20

4 名成员

创作了15篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 17

总计 4,510