跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

In order to obtain access to the internal components you must first follow this step by step general disassembly guide. This will be a first stop in installing a new component that is enclosed by the outer shell.

配件

没有特定配件。

  1. Turn computer over. Remove battery expansion cover and battery.
    • Turn computer over.

    • Remove battery expansion cover and battery.

  2. With monitor hinge at the bottom, remove the two top center screws.
    • With monitor hinge at the bottom, remove the two top center screws.

  3. Remove top left and top right screws.
    • Remove top left and top right screws.

  4. Manta 螺丝刀工具包

    日常维修的112个替换头

    Upgrade Your Toolbox

    Manta 螺丝刀工具包

    Upgrade Your Toolbox
  5. Remove middle left and middle right screws.
    • Remove middle left and middle right screws.

  6. Open computer kickstands.
    • Open computer kickstands.

    • Remove screws underneath each kickstand.

  7. Lift keyboard from bottom and take out of shell.
    • Lift keyboard from bottom and take out of shell.

  8. Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool. Removing both ribbon cables from the motherboard will leave the clamps like so. From here you can access the logic board, hard drive, and floppy drive.
    • Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.

    • Removing both ribbon cables from the motherboard will leave the clamps like so.

    • From here you can access the logic board, hard drive, and floppy drive.

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

Mark McNeff

于2011年04月20日注册

469 信誉积分

创作了2篇指南

http://tim.id.au/laptops/apple/powerbook... (PDF)

Apple Service Source: PowerBook 500 Series

Guides for everything.

tas - 回复

Thanks been trying to fix this for a long time

Luke - 回复

添加评论

浏览统计数据:

过去的24小时: 5

过去的7天: 5

过去的30天: 22

总计 4,745