简介

How to open the converter box and replace the power supply...

  1. Unplug your device from the wall outlet.
    • Unplug your device from the wall outlet.

    添加评论

  2. Remove the screws on the sides and rear. There are two on each side and four on the back.
    • Remove the screws on the sides and rear. There are two on each side and four on the back.

    • Note: only remove the black ones (the silver ones stay for now). You should have removed eight identical screws by now.

    添加评论

    • Lift the top cover up and toward you simultaneously. It shouldn't require very much force.

    添加评论

    • Locate the power board inside the converter box.

    • Circled in red in the picture.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove this plug

    • You will need to squeeze the locking lever to release it. don't pull too hard.

    • Circled in red in the picture.

    添加评论

    • Remove this plug from the main board. It is not detachable from the power board end.

    • Be gentle.

    • Circled in red in the picture

    添加评论

    • Remove one last cable. This one leads to the front panel

    • Be gentle.

    • Circled in red

    添加评论

    • Remove the power cord from its slot in the casing. This will make it easier to remove the power board.

    • Circled in blue

    添加评论

    • Remove the four silver colored philips screws holding the power board in.

    • Marked in pink (eeww)

    添加评论

    • Lift the power board out. Be careful to not touch the bottom of the power board. even when unplugged, it may still hold a charge.

    • Here is the empty spot.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Michel

于2010年06月18日注册

261 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 8

总计 8,638