跳转到主内容

简介

This guide will show you how to reattach a charm onto an anklet.

  1. To start, decide where on the chain you wish to place the charm. Thread the headpin through the chain link, and then place the charm on the headpin next to the chain. To start, decide where on the chain you wish to place the charm. Thread the headpin through the chain link, and then place the charm on the headpin next to the chain.
    • To start, decide where on the chain you wish to place the charm. Thread the headpin through the chain link, and then place the charm on the headpin next to the chain.

  2. Bend the head pin in half, with the chain and charm at the apex of the bend.
    • Bend the head pin in half, with the chain and charm at the apex of the bend.

  3. Cross the head pin to create a loop. Pull as tightly as possible.
    • Cross the head pin to create a loop. Pull as tightly as possible.

  4. Use round nose pliers and your hands to twist the head pin, closing off the loop. Make the twists as tight as possible. Twist 2-4 times.
    • Use round nose pliers and your hands to twist the head pin, closing off the loop. Make the twists as tight as possible. Twist 2-4 times.

  5. Use semi-flush side cutters to cut the extra length off of the head pin.
    • Use semi-flush side cutters to cut the extra length off of the head pin.

  6. Use round-nose pliers to fold the twisted head pin so it is flush with itself.
    • Use round-nose pliers to fold the twisted head pin so it is flush with itself.

  7. Finished!
    • Finished!

结论

To reassemble your device, follow these instructions in reverse order.

Helene Hartfield

于2020年07月27日注册

145 信誉积分

撰写一个指南

团队

UW Tacoma, Team S1-G4, Cardinal Summer 2020 UW Tacoma, Team S1-G4, Cardinal Summer 2020 的会员

UWT-CARDINAL-SU20S1G4

1 名成员

创作了1篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 626