简介

This mouse was designed with usability in mind taking little to no effort to fix anything.

  1. Use the screwdriver to remove the stickers hiding the screws marked in red.
    • Use the screwdriver to remove the stickers hiding the screws marked in red.

    添加评论

  2. Remove the 4 screws to continue.
    • Remove the 4 screws to continue.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Pry the center of the mouse apart to separate the upper and lower housing of the boards.

    添加评论

    • Remove the wires from the white crimp headers. This will separate the upper and lower housing units of the mouse.

    • Don't pull the wires too hard, as they might break.

    添加评论

    • Pull the Scroll wheel, in red, to the left to remove it.

    • This may take some force to remove. Make sure to pull it parallel to the board, instead of perpendicularly.

    • Replace/clean if needed.

    • If your mouse still doesn't work after this step, please continue onto the next step.

    添加评论

    • Desolder these 3 pins and solder the replacement part in.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Vincent Lee

于2014年01月23日注册

361 信誉积分

创作了3篇指南

团队

Cal Poly, Team 1-39, Maness Winter 2014 Cal Poly, Team 1-39, Maness Winter 2014 的会员

CPSU-MANESS-W14S1G39

4 名成员

创作了8篇指南

Hi Vincent, could you please help me with finding a place where this rotation sensor can be bought. I'm not even sure how this part is called so searching for it is quite tricky.

Cheers,

Michal

Michal Rorat - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 22

过去的30天: 62

总计 4,250