跳转到主内容

American Era Cup Cake Maker CCM-6 Disassembly

你所需要的

  1. American Era Cup Cake Maker CCM-6 Disassembly, American Era Cup Cake Maker CCM-6 Disassembly: 步骤 1 中的图像 1,1
    • Open the cup cake maker

    • Unscrew the 4 Phillips screws attached along the edge of the iron plate.

  2. American Era Cup Cake Maker CCM-6 Disassembly: 步骤 2 中的图像 1,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 2 中的图像 2,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 2 中的图像 3,3
    • Using s Phillips screwdriver, unscrew the LEDs from the panel located on the inside of the top cover.

  3. American Era Cup Cake Maker CCM-6 Disassembly: 步骤 3 中的图像 1,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 3 中的图像 2,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 3 中的图像 3,3
    • Now that the top cover can be separated, unscrew the 4 Phillips screws holding the cardboard panel in place.

    • Remove the panel from the rest of the body.

  4. American Era Cup Cake Maker CCM-6 Disassembly: 步骤 4 中的图像 1,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 4 中的图像 2,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 4 中的图像 3,3
    • Rotate the cupcake maker 180 degrees

    • Remove the hinge out of its socket and separate the top half from the bottom half.

  5. American Era Cup Cake Maker CCM-6 Disassembly: 步骤 5 中的图像 1,2 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 5 中的图像 2,2
    • Flip both sides of the cupcake maker over.

    • Locate and remove the shield on the bottom of the machine.

  6. American Era Cup Cake Maker CCM-6 Disassembly: 步骤 6 中的图像 1,1
    • The screw that was hidden under the shield should now be visible. Remove the screw.

  7. American Era Cup Cake Maker CCM-6 Disassembly: 步骤 7 中的图像 1,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 7 中的图像 2,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 7 中的图像 3,3
    • On the same side, locate a box-like structure. Unscrew the screws with a tri-tip screwdriver or a flathead.

    • The screws keeping this box in place are tri-tip screws.

  8. American Era Cup Cake Maker CCM-6 Disassembly: 步骤 8 中的图像 1,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 8 中的图像 2,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 8 中的图像 3,3
    • Using a Phillips screwdriver, unscrew the 2 screws that are attached to the white fastener.

    • After unscrewing the 2 screws, two more screws should be visible that are deep in two holes to the sides of the box. Unscrew those with a Phillips screwdriver.

  9. American Era Cup Cake Maker CCM-6 Disassembly: 步骤 9 中的图像 1,2 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 9 中的图像 2,2
    • There are two screws holding a second cardboard plate in place. Unscrew those with the 4 inch screwdriver.

    • The plate can be moved now, although it cannot be removed, as two sets of wires are soldered in a way that doesn’t allow one to remove the plate.

    • If at this point, the problem is with the feet of the machine, locate the inside of the bottom cover and remove the three screws holding the feet in place with a Phillips screwdriver.

  10. American Era Cup Cake Maker CCM-6 Disassembly: 步骤 10 中的图像 1,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 10 中的图像 2,3 American Era Cup Cake Maker CCM-6 Disassembly: 步骤 10 中的图像 3,3
    • The final screw to remove is on the left side relative to the plate. Use a Phillips screwdriver to remove it.

    • A tiny flat plate is being held in place by the screw.

    • To reassemble the Cup Cake Maker, simply follow the directions but in reverse.

结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 31