简介
The Amazon Fire 8 HD 12th Generation has a screen that is useable for near every function necessary on the tablet. To put it lightly, you cannot use the tablet at all without a functioning screen. Possible things that can lead to a broken screen range from cracking/breaking the screen itself, your tablet not being up to date, or the screen is not responding to your input/touch.
In this guide we will show you how to replace a faulty screen. This guide is difficult so please take your time and be patient when performing the steps. You may want to have a pair of safety gloves. These can be used throughout the guide as there are dangers such as loose or broken glass cutting you.
你所需要的
-
步骤 1 Buttons
注意：步骤 1-2 源自标记为进行中的 指南。
-
Put picks around the corner and move them along the edge to pry the case off.
-
Once there is separation between the case and the screen, place a pick in between the screen and on the corner of the back case.
-
-
-
-
Start off by heating the edges of the screen to melt the adhesive.
-
Insert the opening picks between the screen and device.
-
-
-
Heat up the little black square with yellow orange tape around it on the back of the device, atop the motherboard.
-
Once heated, remove the little black square using tweezers. Unhooking the screen from the screen.
-
Pulling the suction cup, fully remove the screen from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
团队
University of Memphis, Team 1-1, Sneed Fall 2023 University of Memphis, Team 1-1, Sneed Fall 2023 的会员
UM-SNEED-F23S1G1
4 名成员
创作了7篇指南
