跳转到主内容

简介

Use this guide to replace the LED/speaker and microphone board in the Amazon Echo Dot 2nd generation. Both the LED, speaker, and microphone are located on the same board within the device. The whole board must be replaced, rather than each individual component.

  1. Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement, LED/Speaker Board and Microphone: 步骤 1 中的图像 1,3 Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement, LED/Speaker Board and Microphone: 步骤 1 中的图像 2,3 Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement, LED/Speaker Board and Microphone: 步骤 1 中的图像 3,3
    • Power off and unplug the echo

    • Using the plastic opening tool, peel off the rubber layer on the bottom of the echo.

  2. Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 2 中的图像 1,3 Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 2 中的图像 2,3 Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 2 中的图像 3,3
    • Use the T8 screwdriver bit to unscrew the four 1.6mm torx screws

    • Remove the black cylindrical base

  3. Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 3 中的图像 1,3 Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 3 中的图像 2,3 Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 3 中的图像 3,3
    • Use the metal spudger to lift the ZIF connector

    • Remove the ribbon cable from the slot

  4. Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 4 中的图像 1,1
    • Remove the motherboard

  5. Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 5 中的图像 1,3 Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 5 中的图像 2,3 Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 5 中的图像 3,3
    • Remove the silver divider

    • Remove black rubber divider

    • Remove the plastic white frame

  6. Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 6 中的图像 1,3 Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 6 中的图像 2,3 Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 6 中的图像 3,3
    • Use the metal spudger to lift the ZIF connector

    • Remove the ribbon cable from the slot on the LED/speaker board

  7. Amazon Echo Dot 2nd Generation LED/Speaker Board and Microphone Replacement: 步骤 7 中的图像 1,1
    • Remove the LED/speaker board

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Cassidy O'Connor

于2017年10月09日注册

408 声望分

创作了2篇指南

团队

USF Tampa, Team S1-G3, Leahy Fall 2017 USF Tampa, Team S1-G3, Leahy Fall 2017 的会员

USFT-LEAHY-F17S1G3

3 名成员

创作了11篇指南

一条评论

I can’t seem to find the board anywhere. Where would you buy one?

George hanes - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 8

过去的30天: 45

总计 3,921