简介

If your Altec Lansing Super Life Jacket speaker handle damaged, faculty, or loose, use the following step-by-step guide to replace it.

配件

无需配件。

  1. Use your hands to remove the pegs (4) located on both sides of the speaker.
    • Use your hands to remove the pegs (4) located on both sides of the speaker.

    添加评论

  2. Remove the outer black rubber housing of the speaker.
    • Remove the outer black rubber housing of the speaker.

    添加评论

    • Remove the inner blue rubber housing from the speaker.

    添加评论

    • Remove the 4 7.8mm Phillips screws on the speaker cover using the PH0 screwdriver.

    添加评论

    • Carefully slide the handle off the speaker but pushing upwards to the direction the handle is facing.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Tien Nguyen

于2018年07月03日注册

171 信誉积分

撰写一个指南

团队

UW Tacoma, Team S1-G2, Liner Summer 2018 UW Tacoma, Team S1-G2, Liner Summer 2018 的会员

UWT-LINER-SU18S1G2

5 名成员

创作了1篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 5

总计 58