修复你的物品 社区 商店

Altec Lansing BoomJacket Speaker Replacement

简介

Are your speakers not producing the same amount of BOOM that they used to? Perhaps repairing your speakers is the way to go.

你所需要的

  1. Altec Lansing BoomJacket Speaker Replacement, Speaker: 步骤 1 中的图像 1，1

    • Using your hands, remove the pegs (4+4) from the front and back of the speaker.

    编辑

  2. Altec Lansing BoomJacket Speaker Replacement: 步骤 2 中的图像 1，1

    • Remove the outer black rubber housing of the speaker.

    编辑

  3. Altec Lansing BoomJacket Speaker Replacement: 步骤 3 中的图像 1，1

    • Remove the inner blue rubber housing from the speaker.

    编辑

  5. Altec Lansing BoomJacket Speaker Replacement: 步骤 4 中的图像 1，1

    • Pull out the two black wire meshes using a metal spudger.

    • Be careful not to damage the metal casing.

    编辑

  6. Altec Lansing BoomJacket Speaker Replacement: 步骤 5 中的图像 1，2 Altec Lansing BoomJacket Speaker Replacement: 步骤 5 中的图像 2，2

    • Using tweezers remove the rubber stoppers (4 at the back + 2 at the front).

    编辑

  7. Altec Lansing BoomJacket Speaker Replacement: 步骤 6 中的图像 1，1

    • Using the size PH1 screwdriver remove the screws (4 around each speaker).

    编辑

  8. Altec Lansing BoomJacket Speaker Replacement: 步骤 7 中的图像 1，1

    • Pull the case apart and you will be able to see all the components inside the speaker.

    编辑

  9. Altec Lansing BoomJacket Speaker Replacement: 步骤 8 中的图像 1，1

    • Remove the speakers (not entirely because of the wiring) by gently pulling each speaker up.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2条评论

Where do I find the correct part to replace the charging port on my boom jacket?

Rockstar - 回复

1.1" External Magnetic Type Round Slim Plastic Shell Speaker 8 Ohm 0.25W 2 Pcs

Eeshton -

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 6

总计 739