简介

After completing this guide you will be ready to repair or replace any of the components inside your device.

配件

  1. Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.
    • Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.

  2. Using your fingers, grab the blue sleeve from one side and pull away from the unit.
    • Using your fingers, grab the blue sleeve from one side and pull away from the unit.

    • At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.

    • Avoid using excessive force to prevent bending the grill.

    • Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.

    • Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.

    • Gently pull apart the front panel from the base of the speaker.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Zach Braaten

于2018年07月12日注册

495 信誉积分

创作了4篇指南

团队

UW Tacoma, Team S1-G4, Cardinal Summer 2018 UW Tacoma, Team S1-G4, Cardinal Summer 2018 的会员

UWT-CARDINAL-SU18S1G4

4 名成员

创作了4篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 8

总计 95