简介

If your BoomJacket 2 loses charge rapidly, or fails to charge at all consider replacing the battery.

  1. Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.
    • Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.

    添加评论

  2. Using your fingers, grab the blue sleeve from one side and pull away from the unit.
    • Using your fingers, grab the blue sleeve from one side and pull away from the unit.

    添加评论

    • At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.

    • Avoid using excessive force to prevent bending the grill.

    添加评论

    • Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.

    添加评论

    • Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.

    添加评论

    • Gently pull apart the front panel from the base of the speaker.

    添加评论

    • The battery will be in the middle of the speaker when the case is open.

    添加评论

    • Pull firmly from both sides of the pin to disconnect the battery cable from the motherboard.

    • Pull battery up and away from speaker without catching any other components.

    • Motherboards have fragile components and can easily be damaged if they are hit or pulled on while extracting other parts.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Zach Braaten

于2018年07月12日注册

468 信誉积分

创作了4篇指南

团队

UW Tacoma, Team S1-G4, Cardinal Summer 2018 UW Tacoma, Team S1-G4, Cardinal Summer 2018 的会员

UWT-CARDINAL-SU18S1G4

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 9

总计 100