简介

Upgrade your hard drive for more storage space.

  1. First, take off the battery by moving the latch to the left and pulling it up.
    • First, take off the battery by moving the latch to the left and pulling it up.

    添加评论

  2. Then unscrew the two Phillips screws.
    • Then unscrew the two Phillips screws.

    • Pull the cover down, then up, revealing the internals

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unscrew the four screws indicated

    • Pull on the tab that says "Pull" and remove the Hard Drive

    添加评论

    • With even pressure on both sides, take off the SATA converter and then connect it to the drive you would like to replace it with.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

Gabe

于2010年04月09日注册

8,033 信誉积分

创作了3篇指南

团队

Master Techs Master Techs 的会员

Community

279 名成员

创作了758篇指南

Thanks, great guide. Was a bit confused between steps three and four but I simply had to remove the metal casing around the hard drive.

Hasan - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 17

过去的30天: 84

总计 30,995